1 power entry modules without line filter ef11 https://www.schurter.com /pg05 connectors iec appliance inlet c20 with circuit breaker ta45 approvals and compliances c20 70 c description - panel mount : screw-on version from front or rear side, snap-in version from front side - 2 functions : appliance inlet protection class i , circuit breaker type ta45 2-pole - quick connect terminals 6.3 x 0.8 mm characteristics - all single elements are already wired - unwired versions available on request - circuit breaker non-illuminated or illuminated - suitable for use in equipment according to iec/ul 60950 other versions on request - unwired versions - variant with notch for v-lock mating cordsets references alternative: version with line filter ef12 weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, accessories, detailed request for product, microsite newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 16 a / 250 vac; 50 hz ratings ul/csa 20 a / 125/250 vac; 60 hz dielectric strength > 1.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation tempe - rature -10 c to 55 c ip-protection from front side ip 40 acc. to iec 60529 insulation cover suitable for appliances with protection class i acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet/-outlet c20 acc. to iec 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 16 a, protection class i circuit breakers acc. iec/en 60934, ul 1077, csa 22.2 no. 235 2-pole rocker switch, illuminated or non- illuminated. optional with undervoltage- or remote trip release short circuit capacity icn: at in < 3a/240vac : 10 x in at in 3a/240vac : 300a approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: ef11 approval logo certificates certification body description vde approvals vde certificate number: 40001029 ul approvals ul ul file number: e96454
2 power entry modules without line filter ef11 https://www.schurter.com /pg05 connectors product standards product standards that are referenced organization design standard description designed according to iec 60320-1 appliance couplers for household and similar general purposes designed according to iec 61058-1 switches for appliances. part 1. general requirements designed according to ul 498 standard for attachment plugs and receptacles designed according to csa c22.2 no. 42 general use receptacles, attachment plugs, and similar wiring devices application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. micrositev-lock schurter ag v-lock system are based on a matching plug-dose combination. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. dimensions [mm] screw-on mounting ? 3.3 90 100 ? 6.4 32.5 26.6 4.8 12.2 40.55 79.2 10.4 32.2 36 41.7 10.6 76.7 2.3 5 r 6 r 4.7 r 2.8 0.8 12 78.7 31.7 r 2.55 0.10 3.6/m3 0.05 r 2.95 0.10 79.5 0.05 5.25 90 0.10 ** --- version ta45 with undervoltage relaese
3 power entry modules without line filter ef11 https://www.schurter.com /pg05 connectors snap-in mounting 32.2 83 32.5 26.6 4.8 12.2 40.55 79.2 36 41.7 10.6 76.7 2.3 r 4.7 r 2.8 12 78.7 31.7 r 2.55 +0.05 - 0.15 79.5 s 0.05 +0.05 - 0.10 r 2.95 0.05 **--- version ta45 with undervoltage release diagrams 1) 2) l' p 1 n' p 2 n l pe pe' 1) line 2) load
4 power entry modules without line filter ef11 https://www.schurter.com /pg05 connectors ab t w f 150 c0 colours switch fr ont rocker w black white ? b black black ? 6 black ? orange transp. f embossed h printed white k printed black l printed white surface illustration colour of print rocker legend l o on off on off l o m printed black p printed white r printed black surface illustration colour of print i n code 10,0 100 11,0 110 12,0 120 i n code 13,0 130 14,0 140 15,0 150 i n code 16,0 160 17,0 170 18,0 180 i n code 19,0 190 20,0 200 without r elease: code c0 undervoltage r elease remote trip r elease ue za code rated voltage u n ? ? ? ? ? ? ? ? ? ? ? ? 2 3 4 240 v ac 230 v ac 120 v ac l o o i o i position of the r ocker legend e.g f rated curr ent cir cuit br eaker of equipment t able 1 selection for type t a45 or der example ? cir cuit br eaker of equipment ? 2-pole, r ocker actuated ? quick connect terminal other variants on r equest w ithout illumination w ith illumination 220?240 v 110?120 v 3 5 p 1 a diagram thermal overload pr otection 1-pole 2-pole abt abd a12 a32 a14 a34 } other rated curr ents on r equest p2 p1 u< p2 p1 c p2 p1 6 3 43 p2 p1 p2 p1 b u< p2 p1 b a u<
5 power entry modules without line filter ef11 https://www.schurter.com /pg05 connectors t echnical data (continued) cir cuit br eaker tr ipping characteristics i n < 3 a tr ipping characteristics i n > 3? < 18 a tr ipping characteristics i n > 18 a ty pe ta 45 rated curr ent i n <3 a 1 pole pr otected 2 pole pr otected ambient temp. +23 c 10'000 60 2`000 1`000 500 200 100 50 20 10 5 2 1 0,5 0,3 0,2 0,1 [ sec ] [ min ] 10 5 1 30 20 1,05 multiple of rated curr ent [ x i n ] 10 8 5 4 3 2 1,32 tr ipping time t ype ta 45 rated curr ent i n > 3 a... < 18 a 1 pole pr otected 2 pole pr otected ambient temp. +23 c 10'000 60 2`000 1`000 500 200 100 50 20 10 5 2 1 0,5 0,3 0,2 0,1 [ sec ] [ min ] 10 5 1 30 20 1,05 multiple of rated curr ent [ x i n ] 10 8 5 4 3 2 1,32 tr ipping time t ype ta 45 rated curr ent i n > 18 a 1 pole pr otected 2 pole pr otected ambient temp . +23 c tr ipping time 10'000 60 2`000 1`000 500 200 100 50 20 10 5 2 1 0,5 0,3 0,2 0,1 [ sec ] [ min ] 10 5 1 30 20 1,05 multiple of rated curr ent [ x i n ] 10 8 5 4 3 2 1,32 1) ef fect of ambient temperatur e the unit is calibrated for an ambient tem pe ratur e of +23 c. to determine the rated curr ent for a lower or higher ambient tempera- tur e, use a corr ection factor fr om the table below: 1) example rated curr ent at +23 c 6,0 a ambient temperatur e +40 c corr ection factor 1,08 chosen rated curr ent at +40 c ambient temperatur e 6 a x 1,08 = 6,5 a * t emperatur e must be measur ed at the re ar of the br eaker next to the terminals after equipment operating temperature has been reached. * ambient temperatur e [c] corr ection factor ?10 0,89 ? 5 0,91 0 0,92 +23 1,00 +30 1,03 +40 1,08 +55 1,16 configurtation code (example) t ype see table 1 optional va riants 0 standar d 9 v -lock notch colour 0 black mounting 0 sc re w mounting 2 snap-in mounting s = 1.5 3 snap-in mounting s = 2.0 4 snap-in mounting s = 2.5 t erminal pe 1 quick-connect terminals 6.3x0.8m m t erminal n 1 quick-connect terminals 6.3x0.8mm, without connection to t a45 3 connection to ta 45 non insulated t erminal l 1 quick-connect terminals 6.3x0.8mm, without connection to t a45 3 connection to ta 45 non insulated or der code ta 45 (2-pole r ocker -switch without accessories) ef11 - ABTWF150C0 - 000 - 111 - 000
6 power entry modules without line filter ef11 https://www.schurter.com /pg05 connectors packaging unit 16 pcs accessories description assorted covers rear cover 0859.0109 cord retaining kits cord retaining strain relief flat head, h 4700.0008 mating outlets/connectors category / description connector overview complete iec connector c19, rewireable, straight 4795 iec connector c19, rewireable, angled 4790 iec connector c19, rewireable, straight 0104u connector further types to ef11 power supply cord overview complete cord sets 10 a, north america, 3.0 m, connector iec c13, sjt 3x18 awg, transparent 4300.0920 cord sets 16 a, europlug, 2.5 m, connector iec c19, h05vv-f3g1.5, black 6004.0395 cord sets 16 a, interconnection, 1.0 m, connector iec c19, h05vv-f3g1.5, black 6020.0392 cord sets 16 a, interconnection, 2.0 m, connector iec c19, h05vv-f3g1.5, black 6020.0394 cord sets 16 a, north america, 2.5 m, connector iec c19, sjt 3x14 awg, black 6009.5195 power supply cord further types to ef11 mating outlets/connectors shuttered power cord overview complete overview power cord with iec appliance connector c19, v-lock, straight vac19ks power cord further types to ef11 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 01.12.2017
|
